zNetLaB › Guided labs › Enterprise
Two DHCP pools 42 — Finance and Reception on one router
Enterprise Intermediate 3 devices 5 checked tasks 100 points Plan lab
Scenario — the router in Imphal has two LAN ports: Gi0/0 for Finance (10.61.1.0/24) and Gi0/1 for Reception (10.61.2.0/24). Both groups use DHCP. Build one pool per LAN (FINANCE and RECEPTION), each handing out its own gateway and the DNS server 9.9.9.9, exclude the first ten addresses of both, then make both PCs lease and prove they reach each other through the router. You build it in a browser, type real commands at each device, and every task below is
checked against the running configuration — so you find out it is wrong before anybody else does.
Open this lab in the simulator
The simulator runs in your browser with nothing to install. This lab is part of the full simulator: open it free for 7 days with a new account, then with a plan. It needs an account, which keeps your progress.
The scenario
the router in Imphal has two LAN ports: Gi0/0 for Finance (10.61.1.0/24) and Gi0/1 for Reception (10.61.2.0/24). Both groups use DHCP. Build one pool per LAN (FINANCE and RECEPTION), each handing out its own gateway and the DNS server 9.9.9.9, exclude the first ten addresses of both, then make both PCs lease and prove they reach each other through the router.
Your role: a network engineer on the enterprise team. Level: Intermediate Done when: all 5 goals show as passed (100 points).
Network status
Devices: 1 router, 2 PCs, cabled as drawn. No Layer 1 or Layer 2 faults: every link is connected and up. R-Imphal starts with addresses (G0/0 10.61.1.1/24, G0/1 10.61.2.1/24). Known problems
None: nothing is misconfigured. The network is simply not finished: what the goals list is what you have to build or secure. Goals
Pool FINANCE serves 10.61.1.0/24 with gateway 10.61.1.1 (25 pts) Pool RECEPTION serves 10.61.2.0/24 with gateway 10.61.2.1 (25 pts) The first ten addresses of both LANs are excluded (10 pts) Both PCs lease an address (20 pts) Finance reaches Reception through the router (20 pts) The activity, in order
Pool FINANCE serves 10.61.1.0/24 with gateway 10.61.1.1 Why: This is the task that checks your configuration directly: the line must really be there, not just look right. Verify with: show running-config Pool RECEPTION serves 10.61.2.0/24 with gateway 10.61.2.1 Why: This is the task that checks your configuration directly: the line must really be there, not just look right. Verify with: show running-config The first ten addresses of both LANs are excluded Why: This is the task that checks your configuration directly: the line must really be there, not just look right. Verify with: show running-config Both PCs lease an address Why: If the host has no address, look at the pool, the exclusions and, across a router, the ip helper-address. Verify with: ipconfig Finance reaches Reception through the router Why: A ping needs a route in BOTH directions. This is the end-to-end proof that everything before it worked. Verify with: ping 10.61.2.11 Tips
Work in the order given: later goals depend on the earlier ones. After every change, run the verify command before moving on; do not guess. Stuck? Read the verify output first. It names the interface, neighbour or route that is wrong. Common mistake: A pool whose network does not match any interface Common mistake: Reusing the same default-router in both pools Common mistake: Excluded range that is too small Why this matters
One DHCP server can serve several subnets: the pool is chosen by the subnet of the interface the request came in on. Each pool needs its own network, gateway and exclusions.
What you will be able to do
Create several pools on one router
Match each pool to its interface subnet
Exclude infrastructure addresses
The network
ISR 2911, PC — 3 devices in all, already cabled.
Fa0 Gi0/0 10.61.1.1/24 Fa0 Gi0/1 10.61.2.1/24 R-Imphal Finance-PC Reception-PC Drawn from this lab: devices, cables, ports and the addresses already set. Device Model Address already set
R-Imphal ISR 2911 configure it Finance-PC PC configure it Reception-PC PC configure it
Cabling
Finance-PC Fa0 ↔ R-Imphal Gi0/0 Reception-PC Fa0 ↔ R-Imphal Gi0/1
What is configured at the start
These are already configured when the lab opens — including, where this is a troubleshooting lab, the fault itself:
R-Imphal interface g0/0
ip address 10.61.1.1 255.255.255.0
no shutdown
exit
interface g0/1
ip address 10.61.2.1 255.255.255.0
no shutdown
exit Tasks, and how each one is checked
Every task is decided by reading the live network — a neighbour in FULL, a ping that succeeds, a line in the running configuration — not by looking for a keyword you typed. The same command shows you what the lab sees.
# Task Pts How to verify it yourself
1 Pool FINANCE serves 10.61.1.0/24 with gateway 10.61.1.1 25 On R-Imphal: show running-config contains the line(s) matching ip dhcp pool FINANCE\b[\s\S]*network 10\.61\.1\.0 255\.255\.255\.0[\s\S]*default-router 10\.61\.1\.1. 2 Pool RECEPTION serves 10.61.2.0/24 with gateway 10.61.2.1 25 On R-Imphal: show running-config contains the line(s) matching ip dhcp pool RECEPTION\b[\s\S]*network 10\.61\.2\.0 255\.255\.255\.0[\s\S]*default-router 10\.61\.2\.1. 3 The first ten addresses of both LANs are excluded 10 On R-Imphal: show running-config contains the line(s) matching ip dhcp excluded-address 10\.61\.1\.1 10\.61\.1\.10. and On R-Imphal: show running-config contains the line(s) matching ip dhcp excluded-address 10\.61\.2\.1 10\.61\.2\.10. 4 Both PCs lease an address 20 On Finance-PC: ipconfig shows an address. and On Reception-PC: ipconfig shows an address. 5 Finance reaches Reception through the router 20 On Finance-PC: ping 10.61.2.11 must succeed.
Stuck? Ask the coach
Tell the coach what you see or what you tried. It gives you a hint, not the answer, the way a senior engineer would. Included with a free trial or any plan.
Ask the coach
Common mistakes
A pool whose network does not match any interface
Reusing the same default-router in both pools
Excluded range that is too small
Reference solution
Try it yourself first — the lab checks your work either way. This is one configuration that makes every task pass, device by device:
R-Imphal ip dhcp excluded-address 10.61.1.1 10.61.1.10
ip dhcp excluded-address 10.61.2.1 10.61.2.10
ip dhcp pool FINANCE
network 10.61.1.0 255.255.255.0
default-router 10.61.1.1
dns-server 9.9.9.9
exit
ip dhcp pool RECEPTION
network 10.61.2.0 255.255.255.0
default-router 10.61.2.1
dns-server 9.9.9.9
exit Finance-PC ipconfig /renew Reception-PC ipconfig /renew Where this is examined
CCNA 4.0 DHCP; Network+ 1.6.
This lab practises these topics in the zNetLaB certification courses:
Related labs
Where to start
The lessons all guided labs plans
CCNA®, CCNP® and Cisco® are trademarks of Cisco Systems, Inc. zNetLaB is not affiliated with or endorsed by Cisco.